Router Bit Speed Chart: RPM for Different Diameters
As a woodworker who uses a router table regularly, I’ve learned that matching RPM to bit diameter isn’t optional — it’s a fundamental safety and...
Biscuit Joinery vs Dowels: Strength Test Results
Biscuit joints and dowel joints both align and strengthen edge-to-edge and corner connections. Tests show measurable differences in strength, but practical considerations often matter more...
Wood Stain Colors: Oak vs Pine Absorption Rates
Staining oak and pine has gotten confusing with all the prep debates and product recommendations flying around. As a woodworker who has stained both species...
Table Saw Blade Types: Rip, Crosscut, and Combination
Table saw blades come in three main configurations: rip blades for cutting with the grain, crosscut blades for cutting across the grain, and combination blades...
Polyurethane Application: Brush vs Wipe-On Method
As a woodworker who has finished a lot of furniture over the years, I’ve used both brush and wipe-on polyurethane extensively. Each has its place,...
Band Saw Blade Width Guide: Curves and Resawing
As a woodworker who uses a band saw for both resawing and curved work, I’ve learned that blade width is one of the most consequential...
Wood Filler vs Wood Putty: When to Use Each
Wood repair products have gotten complicated with all the options and conflicting advice about when to use what. As a woodworker who has dealt with...
Drawer Slides Comparison: Side Mount vs Under Mount
As a woodworker who has built a lot of cabinets and drawers over the years, I’ve installed enough drawer slides to have strong opinions about...
Shop Dust Collection: CFM Requirements by Tool Type
Effective dust collection depends on matching your collector’s airflow capacity to each tool’s requirements. Too little airflow leaves dust in the air and on surfaces....
Chisel Sharpening Angles: 25° vs 30° Comparison
As someone who’s maintained a set of chisels through years of actual shop use, I’ve learned that the angle question has a cleaner answer than...
Stay in the loop
Get the latest crafted wood creations updates delivered to your inbox.